Delta Electronics Delta Temperature Controller DTA4896R1 - Page 3

Delta Temperature Controller User Manual
© DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED - 3 - 2007-09-17
CHAPTER 1: DEFAULT SETTINGS OF PARAMETERS
1.1 Default Settings in Temperature Controller
DTA DTB DTC
Model: DTA4896R1 Model: DTB4896RR Model: DTC1000R
PV SV PV SV PV SV
Not connected
to sensor
0.0
Press for
more than 3
seconds to
enter initial
setting mode
Press for
more than 3
seconds to
enter initial
setting mode
Set up control modes
Control mode PID control
Run/stop Run
Output 1 Heating
Output 2 Heating
Status of key Normal
Auto-tuning End
Set up temperature
Input type
PT100
Input unit
°C
Set value
0.0
Maximum input
temperature
600.0
Minimum input
temperature
-20.0
Position of
decimal point
1 digit after
decimal point
Set up PID parameter
Proportional
band (P)
47.6
Integral time (I)
260
Derivative time
(D)
41
Control cycle 1
20
Integral default
value
0.0
Control cycle 2
20