To Next PageTo Next Page
Need help?Do you have a question about the DELTA GROUP Eltek Flatpack S 332748 and is the answer not in the manual?
Details on GMT fuses and Plug-in CBs for DC distribution in 1U shelves.
Information on SELV and Dry Contact alarming configurations for 1U systems.
Key warnings regarding compliance, hazardous voltage, leakage current, and fan safety.
Specific guidance on preventing electric shock during installation and maintenance.
Guidelines for selecting appropriate tools and torque specifications for installation.
Specifications for Flatpack S Rectifiers, including input voltage and output current.
Recommended AC breaker sizes and wire gauges for rectifier installations.
Step-by-step instructions for installing rectifiers into the power shelf.
Procedure for installing or removing the Smartpack S controller.
Instructions for installing and removing rectifier blind panels.
Summary of terminals and ports on the Smartpack S controller.
Guidance on accessing the controller's Ethernet port for network connection.
Overview of different Flatpack S 1U shelf capacities and configurations.
Physical dimensions and recommended clearances for 1U shelves.
Essential checks to perform before initiating system startup.
Step-by-step guide to powering on and verifying system operation.
Procedures for adjusting DC output voltage and testing alarm relays.
Checks to ensure the system is ready for initial startup and load adjustments.
Steps for powering up, connecting rectifiers, and adjusting system parameters.
Steps for inspecting the system's condition and functionality.
Procedures for calibrating output voltage, current, and testing alarms.
General| Output Voltage | 48 VDC |
|---|---|
| Output Power | 2000 W |
| Output Current | 41.7 A |
| Cooling Method | Forced air cooling |
| Protections | Over Voltage, Over Current, Over Temperature, Short Circuit |
| Operating Temperature | -40 to 75°C |
