85
MILKQOOL
Maintaining the milk system
• Switch the On/O general button which is located at the back of the
equipment (see Fig. 5).
• Remove carefully the deposit or milk suction tube out (see Fig. 32).
• Then detach the Milk system by pulling out the connector (see Fig. 33).
• Rinse carefully any traces of milk with clean water. Immerse all parts in
hot water with detergent for a few minutes.
• Rinse with cold clean water and wipe with a clean cloth.
Note: The milk system and the milk tank are dishwasher safe.
Fig. 32: Remove the deposit or milk
suction tube out.
Fig. 33: Detach the milk system.
To Next Page
Loading...
