EN INSTRUCTIONS AND MODE OF USE
86
Original settings
Note: The predefined factory volumes for extraction buttons are approximately:
Espresso coee: 30cc
Coee: 45cc
Tea: 180cc
Galão: 190cc
Cappuccino: 190cc
To return the equipment to original factory settings, ensure the machine is
ON (see Fig. 5), and wait until the control panel buttons indicate “Ready to
use” (see Fig. 7).
• Next, you must press together the espresso and the tea extraction
buttons until all the buttons on the control panel start blinking three
times (see Fig. 34).
• As soon as the buttons stop blinking factory settings have been reset.
Fig. 34: Original setting of the
extraction buttons.
A.
B.
C.
D.