Delta-q MINI MILK QOOL User Manual

USING YOUR COFFEE MACHINE
— 07 —
1
The water level should never be higher than the MAX level or lower than
the MIN level.
Plug the lead into the socket.
Turn the device on by pressing any of the buttons .
Remove the water tank and the lid.
Rinse the water tank before using.
Fill the water tank to the MAX level shown with cold
drinking water only.
Reattach the lid and reinsert the water tank correctly.
Remove the water tank and ll it with water.
2
Turn the device on.
Pre-heating:
A white light will illuminate the Delta Q logo;
The buttons will blink in sequence (green colour) for about 1 minute.
Ready to use:
After reaching the right temperature, buttons A, B and C will turn green.
If the milk tank is inserted into the device:
- If the beverage selector is Cappuccion or Latte, button D and selector’s side light are green.
- If the beverage selector is Cleaning, button D and selector’s side light are bule.
If the milk tank isn’t inserted into the device, button D and selector’s side light are o.
First read the SAFETY INSTRUCTIONS.
FIRST USE OR AFTER A LONG PERIOD OF NON-USE
3
Place a cup (min. 250ml) under the nozzle
Repeat this step twice.
4
Press the tisane button to rinse the device
If water does not come out, remove the water tank and re-insert it
in its original position.
Repeat this step until there is a continuous ow of water.
EN
B
A
C
C

Delta-q MINI MILK QOOL Specifications

General

Brand	Delta-q
Model	MINI MILK QOOL
Category	Coffee Maker
Language	English