Delta-q QUICK - Original Settings; Stand By Mode; Purge; Cleaning and Maintenance

31
QUICK
ORIGINAL SETTINGS
• Pressing the espresso button and the long
drinks button until the LED blinks
(Programming mode).
• Pressing again the espresso button and the long
drinks button until the LED blinks 3 times
in confirmation.
The appliance switches o automatically.
• The machine switches o automatically after 3 minutes of inactivity, the LED turns o.
If you wish, you can always switch the machine o by pressing the espresso button until
the LED turns o.
• Place a coee cup and without inserting a
capsule, the espresso button to pump the
water through the machine.
The appliance switches o automatically.
When the LED stops blinking the machine
is ready to use.
STAND BY MODE
PURGE
Frequent use of the “Purge” operation ensures improved beverage quality and proper
equipment maintenance.
• Empty the deposit for used capsules and the deposit for liquids frequently.
• Use a dry cloth to clean the water tank.
• The used capsules collection tank, the cup tray and the drip basin may be washed
in water and dried with a soft cloth.
• Clean the outer surfaces of the equipment with a damp cloth.
• You must never immerse the equipment in water or any other liquid.
CLEANING AND MAINTENANCE
Warning: Check if you unplugged the appliance from the power outlet before you clean it.
To prevent electrical shocks, do not immerse the cord, plug or appliance in water or any
other liquid. Do not use any abrasive or solvent-composed cleaning agent.