Need help?Do you have a question about the Delta Security GSM Alarm System and is the answer not in the manual?
General| Brand | Delta Security |
|---|---|
| Model | GSM Alarm System |
| Category | Security System |
| Language | English |
Instructions for inserting a SIM card into the alarm panel. Ensure correct orientation and listen for a click.
Guide for connecting up to two wired accessories using color-coded wires (blue/green for Zone 1, red/yellow for Zone 2).
Steps for powering on the alarm system using the provided 12V 1A adapter and ensuring backup charging.
Defines the function of main operational keys on the alarm panel such as MUTE, VOL+, VOL-, and MENU.
Explains the purpose of menu navigation keys like BACK, UP, DOWN, ENTER, SAVE, and input method keys.
Procedure to disarm the system, access the 'Menu', select 'Program', and enter the default password.
Details on the functions available in the program menu: 'Program' for system settings, 'Chime', 'Alarmed Record', and 'Event'.
Steps to add up to 6 phone numbers for system use, with a maximum length of 22 digits per number.
Procedure to remove a previously added phone number from the system.
Instructions to configure a phone number for system access without requiring a password.
Steps to add up to 3 SMS numbers for notifications, with a maximum length of 22 digits each.
Configuration to enable or disable SMS notifications for system arming and disarming events.
Guide to register up to 8 remote controllers, including renaming and recording their names.
Steps to remove a registered remote control from the system.
Instructions for editing the name of a remote control and recording a voice message for SOS events.
Guide to add, rename, and record up to 50 wireless sensors into the system.
Instructions for automatically searching or manually identifying wireless sensors and their locations.
Name sensor within 25 letters for detailed SMS alerts upon intrusion.
Record sensor name within 5 seconds for voice playback during emergency calls.
Assign sensors to Emergency, Home, Chime, or Delayed zones for specific alarm behaviors.
Configure whether the siren activates when a sensor is triggered.
Procedure to remove a sensor from the system.
Steps to add up to 8 RFID tags by triggering them and assigning a name.
Procedure to change the name of an existing RFID tag.
How to remove an RFID tag from the system.
Configure SMS notifications for arming/disarming events performed with RFID tags.
Guide to register up to 3 wireless sirens by putting them in setting mode.
Steps to change the name of a registered wireless siren.
Procedure to remove a wireless siren from the system.
Settings to turn the siren on/off and configure its sound duration from 1 to 180 seconds.
Options for arm/disarm tone notifications and encrypting the siren to reduce false alarms.
Details on enabling Bluetooth, setting device name, visibility, managing paired devices, and host mode.
Steps for installing the mobile app and pairing the phone with the alarm system using Bluetooth.
Setting up monitoring center number and ADEMCO Contact ID provided by the service provider.
Activating options to upload alarm data and arm/disarm status to the monitoring service.
Procedure to compose and save a custom text message for intrusion alerts.
Steps to record a voice message for playback during emergency calls.
How to remove a previously edited or recorded outgoing message.
Configure automatic system arming and disarming times in 24-hour format.
Set delay times for arming and disarming to prevent false alarms.
Procedure to select and change the system's display language.
Steps to change the system password for enhanced security.
Resets most system settings to factory defaults, excluding paired devices.
Clears all system settings, requiring a complete re-setup.
Tests for LCD, LEDs, keys, RFID reader, voice prompts, recording, RF signals, battery, and power.
Tests for power off, call function, central network connection, wired zones, and Bluetooth.
Instructions for controlling the alarm system by sending specific SMS commands.
Guide to remotely operate the alarm system using voice commands via phone calls.
To Next Page