Delta 19959-SBSD-DST User Manual

1
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
Tools Needed
Herramientas requeridas
Outils nécessaires
Para instalación fácil de su llave Delta
usted necesitará:
• LEER TODAS las instrucciones completamente
antes de empezar.
• LEER TODOS los avisos, cuidados, e
información de mantenimiento.
For easy installation of your Delta
faucet you will need:
• To READ ALL the instructions completely
before beginning.
• To READ ALL warnings, care, and maintenance
information.
Pour installer votre robinet Delta
facilement, vous devez:
• LIRE TOUTES les instructions avant de débuter;
• LIRE TOUS les avertissements ainsi que toutes
les instructions de nettoyage et d’entretien.
Models/Modelos/Modèles
19915-SBSD-DST,
19959-SBSD-DST & 9158-DST
Series/Series/Seria
05/12/2016 Rev. B
MEETS OR EXCEEDS — ASME A112.18.1 / CSA B125.1
ALCANZA O EXCEDE LAS SIGIENTES NORMAS —
ASME A112.18.1 / CSA B125.1
WARNING: THIS FAUCET IS NOT TO BE USED WITH
PORTABLE DISHWASHERS! / ADVERTENCIA:
¡SESTA LLAVE NO SE DEBE UTILIZAR CON
MAQUINAS LAVAPLATOS PORTATILES! /
AVERTISSEMENT: ON NE DOIT PAS BRANCHER UN
LAVE-VAISSELE PORTATIF SUR CE ROBINET!
LE ROBINET EST CONFORME OU SUPÈRIEUR
AUX EXIGENCES DES NORMES SUIVANTES: ASME
A112.18.1 / CSA B125.1
HIGH-RISE PULL-DOWN KITCHEN FAUCETS WITH EZ
ANCHOR™ INSTALLATION
LLAVES DE AGUA, ESTILO CUELLO DE GANZO,
EXTRAÍBLES PARA COCINA CON INSTALACIÓN EZ
ANCHOR™
INSTALLATION DES ROBINETS COL DE CYGNE À
DOUCHETTE RÉTRACTABLE POUR ÉVIER DE CUISINE
AVEC DISPOSITIF EZ ANCHOR
MC
77742
77742
SILICONE
T
E
F
L
O
N
Icons
1/8"
11/16"
Tools Optional
Herramientas Opcionales
Outils facultatifs
EZ Bar (Included)
Barra EZ (Incluida)
EZ Bar (Incluse)
Phillips Screwdriver
(Not Included)
Destornillador Phillips
(no incluido)
Tournevis Phillips
(Non inclus)
1/8 "Allen Wrench
(Included)
Llave Allen de 1/8 “
(Incluida)
Clé Allen 1/8 po
(Incluse)
Adjustable Wrench
(Not Included)
Llave ajustable
(no incluida)
Clé ajustable
(Non incluse)
Cordless Screwdriver
(Not Included)
Destornillador sin cuerda
(no incluido)
Tournevis sans l
(Non inclus)
11/16" Socket Wrench
(Not Included)
11/16” Llave de cubo
(no incluida)
Clé douille 11/16 po
(Non incluse)
www.deltafaucet.com

Delta 19959-SBSD-DST Specifications

General

Brand	Delta
Model	19959-SBSD-DST
Category	Plumbing Product
Language	English

Summary

Installation Tools and Preparation

Required Tools for Installation

Lists essential tools needed for the faucet installation.

Optional Tools for Installation

Lists recommended optional tools that can aid faucet installation.

EZ Anchor™ Mounting System Installation

Preparing the Faucet Mount

Details faucet mounting hole requirements and gasket placement.

Installing and Securing the EZ Anchor™

Step-by-step guide for installing the EZ Anchor™ system securely.

Main Hub Installation - Single Hole

Assembling Faucet to Anchor (1-Hole)

Guides the assembly of the faucet into the anchor for single-hole mounting.

Tightening the Hub for Single Hole Mount

Instructions on how to secure the faucet hub for a single-hole installation.

Main Hub Installation - Three Holes

Assembling Faucet to Anchor (3-Hole)

Guides the assembly of the faucet into the anchor for three-hole mounting.

Tightening the Hub for Three Hole Mount

Instructions on how to secure the faucet hub for a three-hole installation.

Spout and Pull-Out Sprayer Assembly

Connecting Hose and Sprayer

Details on connecting the hose to the spout and attaching the sprayer.

Alternative Hose Installation

Describes an alternative method for feeding the supply hose.

Spout Removal and Re-installation

Procedure for removing and reattaching the spout.

Water Line Connections

Standard Water Line Setup

Instructions for connecting water supply lines to the faucet.

Custom PEX Tubing Connections

Guidance for fitting PEX supply tubing, including sleeves and nuts.

Water Line Connection Troubleshooting

Solutions for common problems encountered with water line connections.

Plastic Sleeve Installation for Custom Fit

Steps for Plastic Sleeve Installation

Detailed steps for installing plastic sleeves on PEX tubing.

Correct vs. Incorrect Sleeve Fit

Illustrates proper and improper plastic sleeve installation methods.

Supply Line Flushing and Hose Connection

Flushing Water Supply Lines

Procedure to flush supply lines to remove debris before final connection.

Connecting the Supply Hose to Faucet

Instructions for attaching the supply hose to the faucet outlet.

Final Leak Check and Sprayer Test

Checking All Connections for Leaks

Verify all water connections for leaks after installation.

Testing Sprayer Functionality

Confirm proper operation of the sprayer, including lock-in and trigger.

Soap Dispenser Installation (Optional)

Mounting the Soap Dispenser

Steps for installing the soap dispenser body and bottle onto the sink.

Adjusting Handle Temperature Limit

How to set the handle limit stop for temperature control.

Maintenance and Cleaning

Troubleshooting Low Flow Issues

Steps to address low water flow by cleaning aerator and screen.

Resolving Faucet Leaks

Procedures for fixing leaks from the handle or spout.

Faucet Cleaning and Care

Guidance on cleaning the faucet finish to maintain its appearance.

Backflow Protection System Explanation

Information on the faucet's built-in backflow prevention system.

Limited Warranty Information

Parts and Finish Warranty Coverage

Details warranty terms for faucet parts and finishes against defects.

Electronic Parts and Battery Warranty

Specifies warranty for electronic components and batteries.