Do you have a question about the Delta 50570 Series and is the answer not in the manual?
Brand | Delta |
---|---|
Category | Plumbing Product |
Series | 50570 |
Finish | Chrome |
Installation Type | Wall Mount |
Warranty | Limited Lifetime |
Contact information for Delta Faucet Company Product Service in the US.
Contact information for Masco Canada Limited, Plumbing Group.
Instructions for installing slide bar models.
Instructions for installing slide bar models.
Steps to install the wall mount bracket for hand showers.
Instructions for installing the shower head mount.
Details about parts and finish warranty coverage.
Warranty details for electronic parts and batteries.
Contact information for Delta Faucet Company Product Service.
Contact information for Masco Canada Limited, Plumbing Group.
Contact information for Delta Faucet Company Product Service.
Contact information for Masco Canada Limited, Plumbing Group.
Warranty details for parts and finishes.
Warranty for electronic parts and batteries.
Instructions for installing the valve cartridge.
Instructions for installing the valve cartridge.
Instructions for sliding and threading the bonnet nut.
Instructions for connecting the showerhead to the shower arm.
Instructions for combining handshowers.
Instructions for installing tub spouts.
Explains the function and importance of the Rotational Limit Stop.
Warning about potential scald injury if stop is set incorrectly.
Maximum allowable water temperature and local code requirements.
Guidance on adjusting stop based on seasonal water temperature changes.
Steps for adjusting water temperature using the limit stop.
Steps for adjusting water temperature by repositioning stop.
Warning about potential scald injury if disc is not re-installed.
Ensure cold water flows first and hot water does not exceed 120°F or local code.
Explains the function and importance of the anti-scald stop.
Instructions for sliding the O-ring and sleeve onto the cartridge.
Instructions for installing a spacer and sleeve if required.
Instructions for installing the handle and plug button.
Steps for mounting escutcheon and backplate for specific models.
Troubleshooting steps for faucet leaks from spout/showerhead.
Further troubleshooting steps for persistent faucet leaks.
Troubleshooting steps for maintaining constant water temperature.
Warning against using specific cleaners on handles and levers.
Reference guide for Monitor Series 1300/1400 cartridges.
Reference guide for MultiChoice 13/14 cartridges.
Warranty details for parts and finishes.
Warranty for electronic parts and batteries.
Instructions for removing the valve cartridge.
Instructions for inserting the valve cartridge into the body.
Instructions for sliding and threading the bonnet nut.
Instructions for connecting the showerhead to the shower arm.
Instructions for combining handshowers.
Instructions for installing tub spouts.
Explains the function and importance of the Rotational Limit Stop.
Warning about potential scald injury if stop is set incorrectly.
Maximum allowable water temperature and local code requirements.
Guidance on adjusting stop based on seasonal water temperature changes.
Steps for adjusting water temperature using the limit stop.
Steps for adjusting water temperature by repositioning stop.
Warning about potential scald injury if disc is not re-installed.
Ensure cold water flows first and hot water does not exceed 120°F or local code.
Explains the function and importance of the anti-scald stop.
Instructions for sliding the O-ring and sleeve onto the cartridge.
Instructions for installing a spacer and sleeve if required.
Instructions for installing the handle and plug button.
Steps for mounting escutcheon and backplate for specific models.
Troubleshooting steps for faucet leaks from spout/showerhead.
Further troubleshooting steps for persistent faucet leaks.
Troubleshooting steps for maintaining constant water temperature.
Warning against using specific cleaners on handles and levers.
Reference guide for Monitor Series 1300/1400 cartridges.
Reference guide for MultiChoice 13/14 cartridges.
Warranty details for parts and finishes.
Warranty for electronic parts and batteries.
Instructions for removing the valve cartridge.
Instructions for inserting the valve cartridge into the body.
Instructions for sliding and threading the bonnet nut.
Instructions for connecting the showerhead to the shower arm.
Instructions for combining handshowers.
Instructions for installing tub spouts.
Explains the function and importance of the anti-scald stop.
Warning about potential scald injury if stop is set incorrectly.
Maximum allowable water temperature and local code requirements.
Guidance on adjusting stop based on seasonal water temperature changes.
Steps for adjusting water temperature using the limit stop.
Steps for adjusting water temperature by repositioning stop.
Warning about potential scald injury if stop is not re-installed.
Ensure cold water flows first and hot water does not exceed 120°F or local code.
Explains the function and importance of the anti-scald stop.
Instructions for sliding the O-ring and sleeve onto the cartridge.
Instructions for installing a spacer and sleeve if required.
Instructions for installing the handle and plug button.
Steps for mounting escutcheon and backplate for specific models.
Troubleshooting steps for faucet leaks from spout/showerhead.
Further troubleshooting steps for persistent faucet leaks.
Troubleshooting steps for maintaining constant water temperature.
Warning against using specific cleaners on handles and levers.
Reference guide for Monitor Series 1300/1400 cartridges.
Reference guide for MultiChoice 13/14 cartridges.
Warranty details for parts and finishes.
Warranty for electronic parts and batteries.
Instructions for removing the valve cartridge.
Instructions for inserting the valve cartridge into the body.
Instructions for sliding and threading the bonnet nut.
Instructions for connecting the showerhead to the shower arm.
Instructions for combining handshowers.
Instructions for installing tub spouts.
Explains the function and importance of the anti-scald stop.
Warning about potential scald injury if stop is set incorrectly.
Maximum allowable water temperature and local code requirements.
Guidance on adjusting stop based on seasonal water temperature changes.
Steps for adjusting water temperature using the limit stop.
Steps for adjusting water temperature by repositioning stop.
Warning about potential scald injury if stop is not re-installed.
Ensure cold water flows first and hot water does not exceed 120°F or local code.
Explains the function and importance of the anti-scald stop.
Instructions for sliding the O-ring and sleeve onto the cartridge.
Instructions for installing a spacer and sleeve if required.
Instructions for installing the handle and plug button.
Steps for mounting escutcheon and backplate for specific models.
Troubleshooting steps for faucet leaks from spout/showerhead.
Further troubleshooting steps for persistent faucet leaks.
Troubleshooting steps for maintaining constant water temperature.
Warning against using specific cleaners on handles and levers.
Reference guide for Monitor Series 1300/1400 cartridges.
Reference guide for MultiChoice 13/14 cartridges.
Installer must properly install and adjust the rough-in body.
Instructions for wall preparation and mounting the rough-in body.
Guidelines for stringer and wall distances for proper installation.
Instructions for connecting valve body to supply lines (copper, iron, Pex).
Instructions for back to back or reverse installation.
Warning to remove bonnet/cap before soldering and avoid high temperatures.
Instructions for connecting top and bottom outlets to pipes.
Procedure for pressure testing and flushing the installation.
Steps for removing components, testing, flushing, and reinstalling.
Warranty details for parts and finishes.
Warranty for electronic parts and batteries.
Instructions for installing the diverter, including orientation and connections.