Delta 6902 - Step 2: Installing Crib Back Rail




7
SECTION 1: CRIB ASSEMBLY
STEP 2
PARTS AND TOOLS REQUIRED TO COMPLETE STEP
M4 ALLEN WRENCH
SUPPLIED
FINISHED LEFT
CRIB SIDE
FINISHED RIGHT
CRIB SIDE
E. CRIB BACK
RAIL


INSTALL THE CRIB BACK RAIL (PART E) TO THE FINISHED RIGHT CRIB SIDE AND
FINISHED LEFT CRIB SIDE FROM STEP 1 USING (2) BOLT - 66mm (PART J) AND (1)
WOOD DOWEL (PART P) ON EACH END AS SHOWN BELOW.
TIGHTEN WITH THE M4 WRENCH.
J
E
P
P
J
J
P
J
J. BOLT - 66mm x 4
P. WOOD DOWEL x 2