Delta 7052 - Canopy Option - Section 2, Step 2 B; Install Canopy Rails with Valances; Valance Installation Timing

SECTION 2: CANOPY OPTION
STEP 2B - Valance
PARTS AND TOOLS REQUIRED TO COMPLETE STEP
11
Install the Canopy rails:
1. Place the Long Canopy Rails with Valances over the
bolts on top of the Canopy Posts installed in step 1.
2. Place the Short Canopy Rails with Valances over the
bolts and Long Canopy Rails.
3. In each corner hand tighten (1) Crystal Ball (Part K)
to secure the rails, DO NOT USE Tools.
Note: Valance must be installed before the rails are
attached.
Insert the Long Canopy Rails
(Part F) into the long valances.
Insert The Short Canopy Rails
(Part G) into the short valances.
F. Long Canopy Rail x2
G. Short Canopy Rail x2
K. Crystal Ball x4
F
G
K
F
G
Short Valance
Long Valance