Delta 72045T User Manual

5
How It Works
Changing the Amount of Soap
The dispenser is designed so that when you
grab the spout it should not activate. A tap
will give you a factory set amount of soap. To
modify the amount of soap delivered, follow the
sequence of steps below. The factory setting is
equivalent to 3 taps. So to reduce the amount
delivered, tap 1 or 2 times once in program
mode. To increase the amount delivered, tap 4
or 5 times once in program mode.
Disabling Hands-free
The hands-free feature of the sensor will allow
your set amount of liquid to be dispensed with-
out touching the spout if you place your hand
or a wet sponge within 1/2 inch anywhere near
the spout. To disable the hands-free mode,
follow the directions below.
Grab the spout for 10 seconds.
You will see a solid red light for
3 Seconds. Hands-free is now o󰀨.
To turn hands-free back on, grab the spout for
10 seconds.
You will see a solid blue light for
3 Seconds. Hands-free is now on.
The purple light comes on after
5 seconds, but will turn o󰀨 after
10 Seconds. Let go of the spout when the
light turns o󰀨.
The Purple Light comes on after
5 Seconds, but will turn o󰀨 after
10 Seconds. Let go of the spout when the light
turns o󰀨.
Grab the spout for 5 seconds.
You will see a solid purple light.
Tap 1-5 times for the amount of soap you
want.
The blue light ashes the number of
times you selected (ie: 1-5 times).
If a di󰀨erent amount is
desired, re-tap within 5
seconds.
The purple light will
turn o󰀨 5 seconds
after
last ash.
Your settings have
been saved.
Your soap dispenser will dispense
the same amount with
Touch & Hands-free activation.
Let go of the spout.
It will return to a solid purple light.

Delta 72045T Specifications

General

Brand	Delta
Model	72045T
Category	Plumbing Product
Language	English