Delta AS01DNET-A User Manual

Chapter 9 Serial Communication Module AS00SCM
9- 63
9_
26) Set up the devices for the UD Link Group ID Trigger in HWCONFIG. Once you create the AS00SCM-A module,
the system automatically assigns the corresponding addresses.
27) Double-click AS00SCM-A to open the Device Setting page. Verify that the Card 1 UD Link Group ID Trigger is set
to D28030. Use ISPSoft to enter 1 into register D28030 to start the data exchange.

Delta AS01DNET-A Specifications

General

Brand	Delta
Model	AS01DNET-A
Category	Network Hardware
Language	English