To Next PageTo Next Page
Need help?Do you have a question about the Delta AS04RTD-A and is the answer not in the manual?
General| Model | AS04RTD-A |
|---|---|
| Category | Network Hardware |
| Type | Wireless Router |
| Frequency Bands | 2.4 GHz |
| Max Wireless Speed | 300 Mbps |
| Operating Temperature | 0°C to 40°C |
| Humidity | 10% to 90% non-condensing |
| Wireless Standard | 802.11n |
| Security | WEP, WPA/WPA2 |
| Communication Interface | Ethernet |
| Protocols | TCP/IP, DHCP |
| Ports | 4 x LAN, 1 x WAN |
Step-by-step procedures for installing modules, terminal blocks, extension cards, and wiring modules.
Covers electrical and functional specifications, including input/output details, impedance, and isolation.
Detailed electrical and functional specifications, including rated input ranges, error rates, and isolation.
Guides users through configuring analog modules using the HWCONFIG software.
Guides users through configuring the analog output module using HWCONFIG.
Steps for configuring the AS06XA module using HWCONFIG software.
Configuration steps using HWCONFIG for temperature measurement modules.
Configuration steps using HWCONFIG for temperature measurement modules.
Detailed procedures for making adjustments, calibration, and using the LC Wizard.
Steps for configuring load cell modules using the HWCONFIG utility.
Explanation of Modbus, UD Link, and CANopen modes, including setup procedures.
Configuration for CANopen, Delta Special Driver, and AS Remote modes, including quick setup steps.
Introduction to master/slave modes, scan lists, installation, and IO mapping procedures.
Steps for configuring positioning modules using the HWCONFIG utility.
Configuration of pulse input types, ring, and linear counters.
Lists error codes and troubleshooting procedures for the AS02HC-A module.
