Delta AS01DNET-A User Manual

AS Series Module Manual
3- 14
_3
CR# Name Description
Atr.
Defaults
46
for channel 2
convenient if the system can convert digital
values to floating-
point values for earier
understanding. Here you can set the minimum
and maximum scale ranges of corresponding
floating-point values for channels.
For example, if the scale range for an analog
to digital input channel is ±10.0 V, it indicates
the maximum value is +10.0 V and the
minimum value is -10.0 V.
If the scale range for an analog to digital input
channel is 4 mA ~ 20 mA. It indicates the
maximum value is 20 mA and the minimum
value is 4 mA.
Note: You can use PLC instruction DSCLP
(API0217
) and set SM685 to ON to use
floating-point operations when a conversion
range needs to edit.
47 The minimum scale range
for channel 3
48
49 The minimum scale range
for channel 4
50
51
The minimum scale range
for channel 5
52
53
The minimum scale range
for channel 6
54
55
The minimum scale range
for channel 7
56
57
The minimum scale range
for channel 8
58
59
The maximum scale range
for channel 1
R
10.0
60
61
The maximum scale range
for channel 2
62
63
The maximum scale range
for channel 3
64
65
The maximum scale range
for channel 4
66
67
The maximum scale range
for channel 5
68
69
The maximum scale range
for channel 6
70
71
The maximum scale range
for channel 7
72
73
The maximum scale range
for channel 8
74

Delta AS01DNET-A Specifications

General

Brand	Delta
Model	AS01DNET-A
Category	Network Hardware
Language	English

Summary

Chapter 1 Introduction

1.3 Installation

Covers the procedures for installing AS Series modules, including modules, terminal blocks, and extension cards.

Chapter 2 Digital Input / Output Modules

Chapter 3 Analog Input Module AS04/08AD

3.3 HWCONFIG in ISPSoft

Guides on using HWCONFIG software within ISPSoft for configuring analog modules.

3.4 DIADesigner+ (Hardware Configuration)

Instructions for hardware configuration of analog modules using DIADesigner+ software.

3.5 Troubleshooting

Provides solutions for common issues encountered with analog input modules, including error codes.

Chapter 4 Analog Output Module AS04DA

4.3 HWCONFIG in ISPSoft

Guides on using HWCONFIG software within ISPSoft for configuring the analog output module.

4.4 DIADesigner+ (Hardware Configuration)

Instructions for hardware configuration of the analog output module using DIADesigner+.

4.5 Troubleshooting

Provides solutions for common issues encountered with the analog output module, including error codes.

Chapter 5 Analog Input/Output Module AS06XA

5.3 HWCONFIG in ISPSoft

Guides on using HWCONFIG software within ISPSoft for configuring the AS06XA module.

5.4 DIADesigner+ (Hardware Configuration)

Instructions for hardware configuration of the AS06XA module using DIADesigner+.

5.5 Troubleshooting

Provides solutions for common issues encountered with the AS06XA module, including error codes.

Chapter 6 Temperature Measurement Module AS04/06RTD

6.3 HWCONFIG in ISPSoft

Guides on using HWCONFIG software within ISPSoft for configuring temperature modules.

6.4 DIADesigner+ (Hardware Configuration)

Instructions for hardware configuration of temperature modules using DIADesigner+.

6.5 Troubleshooting

Provides solutions for common issues encountered with temperature measurement modules, including error codes.

Chapter 7 Temperature Measurement Module AS04/08TC

7.3 HWCONFIG in ISPSoft

Guides on using HWCONFIG software within ISPSoft for configuring AS04/08TC modules.

7.4 DIADesigner+ (Hardware Configuration)

Instructions for hardware configuration of AS04/08TC modules using DIADesigner+.

7.5 Troubleshooting

Provides solutions for common issues encountered with AS04/08TC modules, including error codes.

Chapter 8 Load Cell Module AS02LC

8.3 Making Adjustments

Covers procedures for making adjustments to the load cell module, including steps and wizards.

8.4 HWCONFIG in ISPSoft

Guides on using HWCONFIG software within ISPSoft for configuring the load cell module.

8.5 Troubleshooting

Provides solutions for common issues encountered with the load cell module, including error codes.

Chapter 9 Serial Communication Module AS00SCM

9.3 COM mode

Describes the COM modes (Modbus, UD Link, CANopen) available for the AS00SCM module.

9.4 RTU Mode

9.5 Normal Exchange Area

9.6 Application

9.7 Error Codes

Lists and explains the error codes and troubleshooting procedures for the AS00SCM module.

Chapter 10 Function Cards

10.5 HWCONFIG in ISPSoft

Chapter 11 DeviceNet Master Scanner Module AS01DNET-A

11.3 DeviceNet Network Communication

11.4 Master /Slave Mode

11.5 RTU Mode

Chapter 12 Positioning Module AS02/04

12.3 HWCONFIG in ISPSoft

12.4 Troubleshooting

Provides solutions for common issues encountered with positioning modules, including error and state codes.

Chapter 13 IO-Link Communication Module AS04SIL

13.4 Application Examples

13.5 IO-Link Event Code Table

13.6 Module Status Codes

Chapter 14 High Speed Counter Module AS02HC

14.3 Operation

14.4 Hardware Configuration via HWCONFIG in ISPSoft

14.5 Troubleshooting

Provides solutions for common issues encountered with the high-speed counter module, including error codes.