The list below describes the
Enter Present Value
dialog box.
Message
Type a 16-bit, 32-bit or 64-bit value.
Type a value in the
Present Value
box.
Type the name of a device or a symbol whose present value you want to change
Value change history (Format: Device name Value)
In binary mode, use the mouse to set the bit states.
Click
OK
to apply the setting values. Click
Cancel
to close the window without applying the values.
Display or hide binary mode.
In this example, X0.0–X0.15 and Y0.0–Y0.15 are input and output devices assigned to the digital I/O module
AS332T-A. After you download the hardware parameters to the CPU module, the states of X0.0–X0.15 are the
same as the states of the inputs on the actual module. Even if you set X0.0–X0.15 to ON or OFF in the
program editing window, the actual input signals update the states of X0.0–X0.15.
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
To Next Page
Loading...
Need help?
General
