Need help?Do you have a question about the Delta CMM-PN02 and is the answer not in the manual?
Provides step-by-step instructions for installing the communication card in MS300 drives.
Provides step-by-step instructions for installing the communication card in MH300 drives.
Shows the wiring diagram for CMM-PN02 and drive status after connection.
Details key parameters for setting the communication card as frequency/control source.
Details setting up static IP addresses for PC and PLC for network communication.
Guides on configuring IP address and Ethernet node in Siemens STEP 7 software.
Guides on searching PLC IP address and configuring network in TIA PORTAL.
Demonstrates speed mode configuration using Siemens STEP 7 for S7-300.
Explains how to test drive control by writing a PLC program in STEP 7.
Demonstrates speed mode configuration using TIA PORTAL for S7-1500.
Explains testing drive control via PLC program in TIA PORTAL using 60xx format.
Demonstrates synchronous/asynchronous parameter read/write using S7-300 and TIA Portal.
Details how to set up non-periodic parameter read/write operations.
General| Brand | Delta |
|---|---|
| Model | CMM-PN02 |
| Category | Conference System |
| Language | English |
To Next Page