Delta PARTY TENT 20’x20’ PE User Manual

Please read instructions COMPLETELY before
assembly. This party MUST be securely anchored.
THIS IS A TEMPORARY STRUCTURE AND NOT
RECOMMENDED AS A PERMANENT
STRUCTURE
Warning!
1. Prior to installation, consult with all local municipal codes regarding installation of temporary
shelters. The owner of the tent has the sole responsibility to make sure that these local rules are
followed and that the mounting is correct.
2. We are not responsible for damage to the unit or the contents from acts of nature.
3. It is always recommended that you secure your tent properly with storm straps and ground
pegs when you put up the structure. Proper Anchoring system selection is your responsibility.
PARTY TENT 20’x20’ PE

Delta PARTY TENT 20’x20’ PE Specifications

General

Brand	Delta
Model	PARTY TENT 20’x20’ PE
Category	Tent
Language	English

Summary

Party Tent Safety and Usage Guidelines

Temporary Structure Warning

This party tent is a temporary structure and must be securely anchored.

Anchoring and Weather Precautions

Ensure secure anchoring, consult local codes, and remove cover in extreme weather.

Continued Safety and Care Instructions

Load Limits and Environmental Protection

Canopy protects from sun/rain/light snow, not heavy loads or severe weather.

Fire and Ignition Source Prohibition

Do not use open fire, welding, or ignition sources inside the tent.

Care and Cleaning Advice

Maintain tight cover, remove water/snow, clean with mild soap and water.

Tent Setup Preparation

Location Selection Criteria

Choose a flat, non-slip, safe, and sheltered location away from hazards.

Assembly Overview and Tips

Assembly is easiest if parts are laid out; use gloves during metal frame assembly.

Party Tent Assembly Steps

Connecting Roof Poles and Connectors

Connect roof poles and connectors, ensuring all poles are fully inserted and screws tightened.

Applying Reinforce Bars

Apply the specified reinforce bars (#4 and #5) to the tent frame as shown.

Attaching Side and End Panels

Attach the side panels and end panels to the tent structure as depicted.

Securing Tent with Pegs and Guy Lines

Use guy lines secured by spiral pegs for corners and short pegs for side/end panels.