Chapter 15 CANopen OverviewMS300 
646 
 
15-4 CANopen Supported Index 
MS300 Supported Parameter Index:   
The parameter index corresponds as shown in this example:   
  Index                       sub-Index   
2000H + Group                    Pr. Number+1 
For example:   
Pr.10-15 (Encoder Stall and Slip Error Action) 
        Group                Pr. Number 
10(0AH)            -            15(0FH) 
    Index = 2000H + 0AH = 200A 
    Sub-Index = 0FH + 1H = 10H 
MS300 Supported Control Index:       
Delta Standard Mode (Old Definition)