Chapter 5 Parameters_VFD-B Series
5-82
Revision 10/2005, BE13, SW V4.08

When Pr.07-12 and Pr.07-13 are set to 10.00 sec, its response time for the compensation will be the
longest. But if the settings are too short, unstable system may occur.
07 - 14
Accumulative Motor Operation Time (Min.) Unit: 1
Settings 00 ~1439 Factory Setting: 00
07 - 15
Accumulative Motor Operation Time (Day) Unit: 1
Settings 00 ~65535 Factory Setting: 00

Pr.07-14 and Pr.07-15 are used to record the motor operation time. They can be cleared by setting to 00
and time is less than 60 seconds is not recorded.
To Next Page
Loading...
Need help?
General