To Next PageTo Next Page
Need help?Do you have a question about the Delta VFD13AME43ANNAA and is the answer not in the manual?
Details about the nameplate information on the AC motor drive.
Explanation of the different parts of the AC motor drive's model name.
Information about the serial number format and its components.
Procedure for applying for after-sales service using a mobile device via QR code or web link.
Information on the RFI jumper, its function, and precautions for removal.
Dimensions and model numbers for Frame A AC motor drives.
Dimensions and model numbers for Frame B AC motor drives.
Dimensions and model numbers for Frame C AC motor drives.
Dimensions and model numbers for Frame D AC motor drives.
Guidelines for minimum mounting clearances and general installation precautions.
Diagram illustrating the system wiring for the AC motor drive and its components.
Detailed instructions and precautions for wiring the AC motor drive.
Diagram of the main circuit terminals, including power input, output, and DC bus connections.
Specifications for main circuit terminals, including ring lug dimensions and wire gauge.
Handling analog input signals, including wiring precautions and noise reduction.
Details on contact input terminals and their modes (Sink/Source).
Information on transistor output terminals and wiring specifications.
Selection guide for brake resistors and brake units based on motor power and voltage.
Recommendations for selecting non-fuse circuit breakers based on model and voltage.
Specifications for branch circuit fuses required for different drive models.
Information on AC and DC reactors, their installation, dimensions, and specifications.
Details on zero phase reactors for interference suppression, including types and dimensions.
Guidance on selecting EMC filters to meet EMC regulations and reduce problems.
Models and reference figures for EMC shield plates used with shielded cables.
Description and installation diagram for the capacitive filter used for basic filtering.
Details on conduit box compliance and dimensions for different frame sizes.
Information on fan models for different frames and fan removal procedure.
Specifications and torque values for DIN-rail mounting accessories for different frames.
Information on mounting adapter plates for changing wiring methods and frame correspondences.
Introduction to digital keypads, communication protocols, and keypad functions.
Step-by-step instructions for installing option cards, including connector mounting and screwing.
Product profile, features, and specifications for the EMM-SAF01 STO card.
Detailed specifications for 115V series, one-phase AC motor drives.
Detailed specifications for 230V series, one-phase and three-phase AC motor drives.
Detailed specifications for 460V series, three-phase AC motor drives.
General specifications covering control characteristics, application, protection, and certifications.
Environmental conditions for operation, storage, and transportation, including temperature and humidity.
Guidelines for derating output current based on ambient temperature and altitude.
Overview of the keyboard panel, including display areas and key functions.
Explanation of the functions associated with each key on the keypad.
Step-by-step guides for operating the keypad, including main page selection and parameter setting.
Summary of drive parameters, including identity code and rated current.
Summary of basic parameters related to motor frequency, voltage, and acceleration/deceleration times.
Description of digital input/output parameters, including operation control and multi-function terminals.
Parameters for configuring motor settings, including auto-tuning and specific motor types.
Overview of protection parameters for low voltage, over-voltage, and over-current stall prevention.
Parameters for configuring communication settings, including address, speed, and protocol.
Parameters for speed feedback control, including pulse input and sensorless estimation.
Details on protection parameters covering output frequency, DC voltage, current, and IGBT temperature malfunctions.
Summary of parameter settings, including drive parameters, rated current, and parameter reset functions.
Table of warning codes, their names, descriptions, and corrective actions.
List of fault codes, their descriptions, action and reset procedures, and corrective actions.
Description of the Safe Torque Off (STO) function and its compliance with international standards.
Description of STO related terminal functions, action logic, and keypad display.
Internal circuit diagram of the safe control loop and wiring diagram for the safe control loop.
Table of relevant safe loop parameters related to failure rates and performance levels.
Instructions for resetting parameters, specifically for STO latch selection.
Timing diagrams illustrating signal status under different conditions for STO and STL functions.
Description of error codes related to STO, STL1, STL2, STL3, and troubleshooting steps.
Steps to verify the normal operation of STO and related detection functions.
General