To Next PageTo Next PageHow to troubleshoot OFF POWER LED on Delta VFD13AMS43ANSAA DC Drives?
If the POWER LED is off, it indicates no power. Check if the connection between the CMM-PD02 and the AC motor drive is normal.
What to do if the Delta DC Drives NET LED flashes orange?
If the NET LED flashes orange, it means that the CMM-PD02 fails to communicate with the AC motor drive. To solve this, switch off the power and check whether the CMM- PD02 is correctly installed and normally connected to the AC motor drive.
Why is the NET LED on my Delta VFD13AMS43ANSAA red?
A red light on the NET LED indicates that the CMM-PD02 is not connected to the PROFIBUS DP bus. To resolve this, connect the CMM-PD02 to the PROFIBUS DP bus.
What to do if the Delta VFD13AMS43ANSAA DC Drives NET LED flashes red?
If the NET LED flashes red, it signifies an invalid PROFIBUS communication address. To fix this, set the PROFIBUS address of the CMM-PD02 between 1–125 (decimal).
Provides detailed dimensions (W, H, D, W1, H1, D1, S1) in mm and inches for Frame A models. This covers A-F.
Details minimum mounting clearances (A, B, C) required for single drive, side-by-side, and zero stack installations based on ambient temperature.
Illustrates the system wiring diagram, explaining the function of components like NFB, magnetic contactor, AC reactors, zero phase reactors, and brake module.
Provides detailed wiring diagrams for input, three-phase power, and control terminals, including digital and analog signal connections.
Presents a diagram of the main circuit terminals, detailing input and output connections for one-phase and three-phase power.
Provides specifications for main circuit terminals, including wire gauge, screw size, and torque requirements for different frames.
Details wiring specifications for control terminals, including stripping length, wire gauge, and tightening torque for relay and control terminals.
Lists specifications for brake resistors, brake units, magnetic contactors, air circuit breakers, non-fuse circuit breakers, fuses, AC/DC reactors, zero phase reactors, EMC filters, shield plates, capacitive filters, NEMA 1/UL Type 1 kits, fan kits, keypad mounting, DIN-rail mounting, mounting adapter plates, and digital keypads.
Describes the digital keypad KPC-CC01, including communication settings, installation method, and keypad function descriptions.
Provides instructions for installing option cards, including mounting positions, wiring of communication cards, and power card cables.
Lists specifications for 115V models, including frame, power, output capacity and current, carrier frequency, input current, voltage, weight, cooling method, EMC filter, and IP rating.
Lists specifications for 230V models, including frame, power, output capacity and current, carrier frequency, input current, voltage, weight, cooling method, EMC filter, and IP rating.
Lists specifications for 460V models, including frame, power, output capacity and current, carrier frequency, input current, voltage, weight, cooling method, EMC filter, and IP rating.
Lists specifications for 575V models, including frame, power, output capacity and current, carrier frequency, input current, voltage, weight, cooling method, and IP rating.
Provides derating curves and guidelines for ambient temperature, altitude, and carrier frequency to ensure optimal performance and prevent overheating.
Describes the layout and functions of the KPMS-LE01 keyboard panel, including displayed items and keypad functions.
Details protection parameters not covered in Part 1, including output frequency, DC bus voltage, current, IGBT temperature, and fault records.
Lists parameters related to the AC motor drive identity code, including settings and default values for various voltage and phase configurations.
Details basic parameters for motors, including maximum/rated frequency, voltage, mid-point frequencies and voltages, minimum output frequency and voltage, and acceleration/deceleration times.
Explains parameters for two-wire/three-wire operation control, multi-function inputs (MI1-MI7), and multi-function outputs (RY1, MO1, MO2).
Details parameters for analog input selection (AVI, ACI), bias, modes, gain, filter time, addition function, and output selection for AFM.
Covers motor parameter auto-tuning, full-load current, rated power, speed, number of poles, no-load current, stator resistance, magnetizing inductance, and stator inductance for induction and permanent magnet motors.
Details protection parameters including low voltage level, over-voltage and over-current stall prevention, over-torque detection, and fault records.
Covers special parameters such as software brake chopper, DC brake, restart after power loss, base block time, and fan cooling control.
Provides detailed information on PID parameters, including terminal selection, proportional, integral, and differential gains, output limits, and feedback values.
Details parameters for communication settings, including address, transmission speed, protocol, IP configuration, and network masks for various communication cards.
Lists all warning codes with their corresponding ID, display on LCD keypad, warning name, and description for quick reference.
Provides a comprehensive list of fault codes, including ID, display on LCD keypad, fault name, fault descriptions, action and reset procedures, cause, and corrective actions.
General