To Next PageTo Next Page
Need help?Do you have a question about the Delta VFD1A6ME21ANNAA and is the answer not in the manual?
General| Horsepower | 1 HP |
|---|---|
| Rated Output Current | 6A |
| Amperage | 6A |
| Control Method | V/F Control |
| Protection Level | IP20 |
Information regarding the drive's nameplate details, including model, input/output voltage, and serial number.
Guidelines for minimum mounting clearances around the AC motor drive for proper installation and heat dissipation.
Diagram illustrating the complete system wiring for power input, reactors, filters, and motor.
Precautions and guidelines for correctly wiring the AC motor drive's power and control terminals.
Diagram showing the main circuit connections, including power input, motor output, DC reactor, and brake resistor.
Specifications for ring lugs and wire gauge for main circuit terminal connections.
Selection guide for brake resistors and brake units based on motor specifications and braking torque.
Introduction to digital keypads, communication settings, and keypad functions.
Step-by-step instructions for installing option cards, including connector mounting and screw fastening.
Product profile, features, and specifications for the EMM-SAF01 STO card.
Guidelines for derating output current based on ambient temperature and altitude.
Detailed explanation of the functions for each key on the digital keypad.
Step-by-step instructions for navigating and operating the digital keypad.
Parameters for configuring induction and permanent magnet synchronous motors.
Over-voltage, over-current, and other protection settings for the drive.
Additional protection parameters, including fault records and output settings.
Detailed explanation of fault codes, their causes, and corrective actions.
Overview of the Safe Torque Off (STO) function and its compliance with international standards.
Description of STO terminal functions, action logic, and keypad display.
Internal circuit diagram and wiring diagram for the safe control loop and STO mode.
Description of STO error codes (76, 72, 77, 78) and their troubleshooting.
