Delta Vivotek IB9391-EHTV-v2 User Manual

VIVOTEK
User's Manual - 111
Two way audio port:
The Network Camera supports two way audio communication so that operators can transmit and
receive audio simultaneously. By using the Network Camera’s built-in or external microphone and
an external speaker, you can communicate with people around the Network Camera.
Note that as JPEG only transmits a series of JPEG images to the client, to enable the two-way
audio function, make sure the video mode is set to H.264 on the Media > Video > Stream settings
page and the media option is set to “Media > Video > Stream settings” on the Client Settings page.
Please refer to Client Settings on page 46 and Stream settings on page 77.
SIP
SIP is short for Session Initiation Protocol. If necessary, you can change the default port number,
5060, to one between 1025 and 65535.
Audio transmitted from operators
Audio transmitted to operators
America
Taiwan

Delta Vivotek IB9391-EHTV-v2 Specifications

General

Brand	Delta
Model	Vivotek IB9391-EHTV-v2
Category	Security Camera
Language	English