Delta Vivotek IB9391-EHTV-v2 - Page 425

VIVOTEK
User's Manual - 425
© 2022 VIVOTEK INC. All Right Reserved
276
network_rtsp_s2_accessname=live2s1.sdp
network_rtsp_s3_accessname=live2s2.sdp
etc.
*Forversionnum b e r (httpversion)above0311c,thedefaultRTSPaccessnameformatis
“live<n>s<m>.sdp”.Pleaserefertothe“subgroupofnetwork:rtsp”forsettingtheaccessnameof
SDP.
*Youcangetth eSDPbyHTTPG ET. 
*Whenusingscalablemulticast,GetSDPfilewhichcontainsthemulticastinformationviaHTTP.
Note:
*Werecommendtousenewformat toaccessstreamingwhen
capability_media_streamprofiles_support=1,pleaserefertoMethodsforAccessingStreaming
8.14 OpentheNetworkStream
Note:Thisre questrequiresVieweraccessprivileges.

Synta x:
ForHTTPpush server(MJPEG):
http://<servername>/<network_http_s<0~m‐1>_accessname>

ForRTSP(MP4),theuserneedstoinputtheURLbelowintoanRTSPcompatibleplayer.
rtsp://<servername>/<network_rtsp_s<0~m‐1>_accessname>

“m”isthestreamnumber.
Fordetailsonstreamingprotocol,pleaserefertothe“controlsignaling”and“dataformat”
documents.

8.15 SendData (capability_nuart>0)
Note:Thisre questrequiresViewerprivileges.
Method:GET/POST

Synta x:
http://<servername>/cgi‐bin/viewer/senddata.cgi?
[com=<value>][&data=<value>][&flush=<value>][&wait=<value>][&read=<value>]

PARAMETER VALUE DESCRIPTION
com 1~<max.comport
number>
ThetargetCOM/RS485portnumber.