Delta VIVOTEK SC9133 - Occupancy Alarm Trigger

14
© VIVOTEK Inc. All rights reserved.
5. Occupancy Alarm Trigger
After install the “occupancy alarm service” VADP package, the service will create two
event triggers, “OccupancyFull” & OccupancyCrrowded” automatically.
“Configuration” > “Event” >
“Event settings” >“Add” a
new event
Configure the event
> “Set VADP Trigger”
Add “OccypancyFull” or
“OccupancyCrowded” into
『Trigger for Event Setting』
list
Then, user can set a event based on these two trigger from “occupancy alarm
service” once the occupancy reach the specific level thredhold.