26
Reading safety class
Some bar codes needs more then one conrmation before sending the result.
This is to lower the amount of decoding errors.
Lower safety class increases the decoding speed, but increases the decoding error rate.
Higher safety class decreases the decoding speed and decreases the decoding error rate.
200ms
1s
500ms
5s
Continuous scan interval:
Each increment of +2 on the barcode increases interval with 200ms more, max is 5s.
Lowest (Class I)
Class III
Class II
Highest (Class IV)
Prex identication: Enable
Prex identication: Disable
Sufx identication: Enable
Prex identication: Disable
To Next Page
Loading...
