25
On
Off
Increase
Decrease
20ms
1s
500ms
2s
LED on time:
Each increment of +1 on the barcode increases the LED on time with 10ms, max is 2 seconds.
LED: on
LED stays on while the scans are good.
LED: off
Laser on trigger:
Each increment of +1 on the barcode increases the duration of the laser for 1s more, max is 9s.
Auto-sensor:
1s
5s
3s
9s
Setting:
When this function is on it can start related settings, when the setting is off, the bar code result is normal/default.
Setting bar code: choose code128, add “^3” before data source.
On Off
To Next Page
Loading...
