What to do if my Deltafox Chainsaw chain becomes hot and smokes?
If the chain becomes hot, smoke develops during sawing, and the rail discolors, it's likely due to insufficient chain oil. Check the oil level and refill with chain oil if needed. Also, inspect the oil automatic system and clean the oil outflow duct, or have it repaired by customer service.
Why won't my Deltafox DG-ECS 1830 Chainsaw start?
If the device doesn't start, possible causes include a defective mains voltage (check the plug socket, cable, line, and plug, and have it repaired by an electrical specialist; also check the house protection fuse), a defective On/Off switch, worn carbon brushes, or a defective motor. For switch, brushes, or motor issues, have it repaired by customer service.
What to do if my Deltafox DG-ECS 1830 Chainsaw has inferior cutting performance?
If your chainsaw has inferior cutting performance, it could be due to an incorrectly mounted saw chain (mount it correctly), a blunt saw chain (sharpen the cutting teeth or replace the chain), or insufficient chain tension (check the chain tension).
What to do if my Deltafox DG-ECS 1830 runs with difficulty and the chain comes off?
If the saw runs with difficulty and the chain comes off, the chain tension may be insufficient. Check the chain tension.
What to do if the chain does not rotate on my Deltafox DG-ECS 1830?
If the chain does not rotate, the chain brake may be blocking the saw chain. Check the chain brake and release it if necessary.
To Next Page
General