EasyManua.ls Logo

DeltaPulse Mole Impulse PRO - SIGNAL INTERPRETATION EXAMPLES; Interpreting Signal Tones for Objects; WORKING WITH BIG COILS; Coil Assembly and Connection

DeltaPulse Mole Impulse PRO
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Notsi, Ltd., Bulgaria, 9027 Varna, Troleyna 12 street
Ph.: 00359 899 822010 ; Fax: 00359 52 507227
Web: www.deltapulse.eu ; E-mail: sales@deltapulse.eu
Mole Impulse Pro operation manual
6
hours experience you will learn to recognize whether the object is deeply buried
or is above the surface.
EXAMPLES:
If the signal tone quickly raise and fall on a small area, this meant that the
object is small and at depth up to 50 cm.
When the signal tone rise on an area with middle size, and after this again
slowly fall, then you are located middle sized object at depth up to 3 meters.
When the signal tone rise on an area with big size, and after this again
slowly fall, then you are located big metal object at depth up to 6 meters.
PREPARING FOR WORKING WITH BIG COILS
Carefully unfold the plastic construction of the coil, lay it down on the ground,
fitting all the ends of the pipes tightly in the elbows. Place the belts for carrying
the coil and the mechanical preparation of the assembling is complete. Plug in
the cable shoe to the COIL output of the device and slightly tighten on hand the
without applying a effort. All settings for operation are as at round coils.
When you want to localize and find out the center of the buried metal object
carry out the following actions: