DeMore's Innovative Design Aerial Tool Bin ATB-1312 User Manual

DeMore’s Innovative Design, Inc.
herewith guarantees the structural
integrity of the Aerial Tool Bin
®
product, for one year and warrants it
against all manufacturer defects. This
Warranty is not applicable to any
damage caused by user or caused
by use other than its intended
purpose on aerial platforms.
Replacement subject to approval by
DeMore’s Innovative Design, Inc.
Upon approval, the Aerial Tool Bin
®
will be replaced free-of-charge.
Call DeMore's Innovative Design, Inc.
for assistance at: 262-825-6784
Thank You for putting your trust
in the Tool Bin Man
®
and
choosing the Aerial Tool Bin
®
.
www.aerialtoolbin.com
1 Year Warranty
200414 ATB-1312 Insert Card
INSTRUCTIONS for Model ATB-1312
1) Remove the warranty and keep in a safe place for your records.
2) Read all warnings on bin and equipment where bin is used.
3) Remove the divider separators and all
components from the packaging on the
sides of the Aerial Tool Bin
®
.
4) Place the Dividers in the channel slots and
allow bottom of divider to insert weep holes.
5) Fasten the tool belt hanger bar with the
two small carriage bolts provided. Insert the
1
1
/2" carriage bolt with wing nut to help retain
the tool pouch and Secure the bar.
6) Insert the two long Lift Rail safety locking
bolts, (provided) Prior to operating your aerial lift.
7) To insert the tool pouch, remove the carriage bolt from the tool belt hanger
bar and slide the tool pouch on. Re-insert the carriage bolt.
8) Load your larger tools in the Aerial Tool Bin
®
and you're ready to go to work.
DeMore's Innovative Design, Inc.
U.S. Patent No.: D675.824 Made in the USA
Divider
Separators
Tool Belt
Hanger Bar
2 long Lift Rail
safety locking
bolts
Lock Nuts
Flat
Washers
Small
Carriage
Bolts
1
1
/2"Carriage
Bolt & Wing
Nut

DeMore's Innovative Design Aerial Tool Bin ATB-1312 Specifications

General

Brand	DeMore's Innovative Design
Model	Aerial Tool Bin ATB-1312
Category	Tools
Language	English

Summary

1 Year Warranty

Product Installation Instructions

Review All Warnings

Read and follow all warnings on the bin and equipment before use.

Unpack Components

Remove divider separators and components from the Aerial Tool Bin packaging.

Install Dividers

Place dividers in channel slots, aligning with weep holes.

Attach Tool Belt Hanger

Fasten hanger bar with carriage bolts, securing tool pouch.

Install Safety Bolts

Insert two long Lift Rail safety locking bolts before operating aerial lift.

Load Tools for Use

Load larger tools into the Aerial Tool Bin and prepare for work.

General Safety Warnings

Follow All Warnings

Read and follow all warnings on this label and the aerial lift.

Intended Use

Bin is for storing tools/hardware used on aerial lifts only.

Weight Limit

Adhere to the maximum tool/hardware weight limit imprinted on the bin.

No Standing

Do not stand on or inside the Aerial Tool Bin.

Secure Area Below

Ensure the area below is secured when using the bin and components.

Temperature Limit

Do not expose the Aerial Tool Bin to temperatures exceeding 210°F.

No Harness Anchoring

Do not use the Aerial Tool Bin as a safety harness anchoring point.

OSHA Compliance

Product complies with OSHA rule 1926.759(a) for securing items aloft.