17
4. PEDALS
1. Drive Side of Bike select R-Right pedal
2. Apply grease to pedal threads
3. Insert Pedal into Crank/Drive side
and start to turn CLOCKWISE.
4. Once hand tight apply pedal wrench to pedal
and tighten and secure.
1. NON Drive Side of Bike select L-Left pedal
2. Apply grease to pedal threads
3. Insert Pedal into Crank Arm/NON- Drive side
and start to turn COUNTER CLOCKWISE.
4. Once hand tight apply pedal wrench to pedal
and tighten and secure.
Apply grease to threads on both
Left and Right Pedal.
MATCH PEDAL and CRANK ARM CAREFULLY
Right pedal is applied to drive side/side with crank and gears and threads/twist on CLOCKWISE
Let pedal is applied on NON-DRIVE side/side with disk rotors and twist COUNTERCLOCKWISE
USE PEDAL WRENCH AND CONFIRM PEDALS ARE TIGHTENED AND SECURE
Check frequently
To Next Page
Loading...