Intended Use
Your bike is intended to be ridden on paved roads. Please always wear a helmet and!
follow all local and common-sense safety. Perform a safety check Before and After EACH
Ride!
Safety Check
For your safety, please do the following inspection before and after each ride.
If you discover any concerns with your bike, please seek professional service or contact!
us at cs@bike.com or 877-755-2453 (BIKE) to help resolve any issues
Make sure your battery is at FULL Charge
Do a Brake, Wheel and Tire CHECK- Both Front and Rear
Check tire inflation, make sure there are no foreign objects or bulges in tires
Spin Wheels freely and confirm NO brake rub or wobbles
Confirm Wheels are tightened and secured
Do a BRAKE CHECK - Both Front and Rear
Lift wheel off ground and spin wheel
Squeeze brake to insure no rub and immediate stop
Check Gears by lifting rear wheel, rotating crank and shifting gears.! Make
sure gears move smoothly and chain is properly lubricated.
Know and understand how all aspects of the eBike components work and be
sure to understand how to accelerate and control the bike along with braking
If needed adjust the payload for even balance
If you notice any cracks, dents, or abnormal issues please seek immediate
professional!support
Know your area, the local laws and the terrain you are riding on.
NOTE: If wet or at dawn, dusk, or dark, your riding will be impaired. Do not ride or ride with more caution
You will need to plan for extended braking and possible road differences. Be sure to be visible with lights and
safety gear
RIDE with CAUTION and RIDE with SAFETY. Always wear a helmet.
If have any issues above or any concerns, please seek immediate professional support! prior to riding your bike.
To Next Page
Loading...
