Shanghai Denair Compressor Co.,Ltd.
www.denaircompressor.net 9/48
Chapter Two
Screw Air Compressor Usage Instruction
One. Basic Operation
A. Button Instruction
Figure 1
I——start key: operate the motor by pressing the key.
O——stop key: stop the motor operation by pressing the key.
S——setting key: after revising data, confirm the data storage and input by pressing the key.
↑——up key: when \revising data, change it by pressing the key to do upturning; a selection key when doing
menu option.
↓——down key: when revising data, change it by pressing the key to do down turning; a selection key when
doing menu option.
→——shift key and confirm key: when revising data, it is shift key and confirm key when menu selection.
↳——backspace key or reset key: when menu operation, it is the backspace key, by pressing which to return
the previous page; when orderly close-down, press the key to reset.
B. Status display and operation
Show the following interface after the machine set powering on.
Welcome to use
Screw Compressor
运行状态:设备已停止
0秒
自动
S
本地
冷
冷
却
器
却
器
后
油
排气温度:80C
供压：0.80MPa
O
I
To Next Page
Loading...