Need help?Do you have a question about the DencoHappel MATRIX OP51I and is the answer not in the manual?
Describes the symbols and notices used to indicate safety instructions.
Provides instructions for safe installation, adjustment, and repair work.
Details the intended applications and protection types of the control panels.
Warns against modifying the control panel, which invalidates warranty.
Outlines requirements for personnel working on the control panel.
Details the process for mounting OP5xC (IP20) control panels.
Details the process for mounting OP5xl (IP54) control panels.
Outlines the default preset configurations for the control panel.
Explains how to assign different group addresses to control panels in a network.
Details how to activate terminating resistors for MATRIX.Net bus integration.
Guides on how to test the control panel's operation after installation.
Introduces the display, buttons, and navigator of the OP5xx control panel.
Describes the main operating screen and its information display.
Explains how to perform basic operations like changing setpoint values.
Describes how to set the desired room temperature for the current operating mode.
Explains how to set the desired supply-air temperature for the current operating mode.
Guides users to find operation messages and potential remedies.
Lists internal errors, sensor errors, and their descriptions/remedies.
General| Brand | DencoHappel |
|---|---|
| Model | MATRIX OP51I |
| Category | Controller |
| Language | English |
To Next Page
