EasyManua.ls Logo

Denlar D1030-I-DF Series - User Manual

Default Icon
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
REPORT
#1122
DENLAR Fire Protection LLC
20 Denlar Dr.
Chester, CT. 06412
p:860.526.9846 f:860.526.9585
email: service@denlarhoods.com
online: www.denlarhoods.com
The D1000
Installation and
Service Manual
Version 2.1
Question and Answer IconNeed help?

Do you have a question about the Denlar D1030-I-DF Series and is the answer not in the manual?

Summary

Read and Save These Instructions

Important Safety Precautions

Crucial safety warnings and cautions for operating the unit.

System Anatomy

Preparing the Install Location

Installing The D1000

Fire Alarm System Connections

Test Tank & Demonstration - TKD

Electrical Schematic - Complete

How it works

Accessing the Internal Components

Removing the Extinguisher Tank

Self-Monitoring System

Low Pressure and Hose Connection Tests

Procedures for testing low pressure and discharge hose connections.

After an Actuation - What to do

Clean-up Procedures

Steps for cleaning kitchen surfaces after system discharge.

Determine Cause of Discharge

How to determine the reason for system discharge before recharging.

After an Actuation - How to Reset the Suppression System

Re-setting and Testing Release Mechanisms

Steps to re-set and test release mechanisms, pull stations, and fusible links.

Recharge Tank Procedure

Instructions for refilling and recharging the extinguisher tank.

Reset Shut-Off Valve or Relay

Denlar D1030-I-DF Series Specifications

General IconGeneral
ModelD1030-I-DF Series
CategoryVentilation Hood
Width30 inches
Number of Motors1
MaterialStainless Steel
Control TypePush Button
LightingLED
Voltage120V
Duct Size6 inches
TypeIsland

Related product manuals