Denon AH-GC25W - Reconnecting Paired Devices

2: Reconnecting paired devices
Check that the headphones are not connected to any Bluetooth device
before connecting.
1
Turn on the Bluetooth function of your Bluetooth
device.
0
For details, see the Owner’s Manual of the Bluetooth device that
you want to connect.
.
2
While the power is off, press and hold the 1/3 button
for approximately 2 second.
The Bluetooth LED lights for approximately 1.5 seconds and the
headphones power on before automatically connecting to the
Bluetooth device.
0
When the Bluetooth connection is established, the Bluetooth LED
lights for approximately 5 seconds.
.
R
2sec.
0
If the Bluetooth connection is not made automatically, select “DENON AH-
GC25W” from the list of devices displayed on the screen of your Bluetooth
device.
3
Playing back music on the Bluetooth device.
Music played back on the connected Bluetooth device is output from
the headphones.
Contents
Preparation Connections Operation Troubleshooting Appendix
16