Denon Audio Commander User Manual

9
Playing Music from a USB Flash Drive
1. Connect your USB flash drive to the top USB port on the rear panel.
2. Press and release the Mode button until the USB device appears on the display
screen.
3. Use the |<< and >>| buttons to scroll through your files and press Play to select
the track to play.
Playing Music from a SD Card
1. Insert a SD card into the card slot.
2. Press and release the Mode button until the SD card appears on the display
screen.
3. Use the |<< and >>| buttons to scroll through your tracks and press Play when a
file is selected to play.
Playing Music from the Aux Input
1. Connect your media device’s output to one of the Aux inputs on Audio
Commander.
2. Play your music device and adjust the source volume if needed.
Note: A source played through the Aux inputs will be blended along with the USB,
SD, Bluetooth, Mic/Line inputs, and W.Mic 1/2 sources. Adjust the Aux In volume as
needed.
Pairing a Bluetooth Device
1. Turn on your Bluetooth device.
2. Navigate to your Bluetooth device’s setup screen, find “Audio Commander” and
connect.
Note: If your Bluetooth device prompts for a pairing code, enter “0000”.
Note: Use the Mode button to select Bluetooth as the source.
To disconnect pairing while the Bluetooth icon is lit solid, press and release the
Bluetooth button.
To connect to another Bluetooth device, repeat step 3.

Denon Audio Commander Specifications

General

Brand	Denon
Model	Audio Commander
Category	Speakers
Language	English