EasyManuals Logo

Denon AVR-S540BT User Manual

Denon AVR-S540BT
135 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #106 background imageLoading...
Page #106 background image
o
Sound is interrupted or noise occurs
Symptom Cause / Solution Page
During playback from the
USB memory device,
sound is occasionally
interrupted.
0
When the transfer speed of the USB memory device is slow, sound may occasionally be interrupted.
Noise often occurs in
FM/AM broadcasting.
0
Change the antenna orientation or position. 34
0
Separate the AM loop antenna from the unit.
0
Use an outdoor antenna. 34
0
Separate the antenna from other connection cables. 34
The sounds appear to be
distorted.
0
Lower the volume. 39
0
Set “Off” to the ECO Mode. When “On” or “Auto” is in the ECO Mode, the audio may by distorted when
the playback volume is high.
92
Contents Connections Playback Settings Tips Appendix
106
Front panel Display Rear panel Remote Index

Other manuals for Denon AVR-S540BT

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-S540BT and is the answer not in the manual?

Denon AVR-S540BT Specifications

General IconGeneral
Channels5.2
Power Output per Channel70 W (8 ohm, 20 Hz - 20 kHz, 0.08% 2ch Drive)
Output Power (6 ohm, 1 kHz, 0.7% 2ch Drive)90 W
Output Power (6 ohm, 1 kHz, 10% 1ch Drive)140 W
HDMI Inputs5
HDMI Outputs1
HDMI Version2.0a
HDCP Support2.2
4K/60 Hz Pass-throughYes
Dolby FormatDolby TrueHD, Dolby Digital Plus
DTS FormatDTS-HD Master Audio
Auto Speaker SetupYes (Audyssey MultEQ)
BluetoothYes
FM TunerYes
AM TunerYes
Input Sensitivity/Impedance200 mV / 47 kOhm
Dimensions (W x H x D)434 x 151 x 319 mm
Ethernet PortNo
Wi-FiNo
HDR SupportHDR10, HLG
Frequency Response10 Hz - 100 kHz - +1/-3 dB
Total Harmonic Distortion0.08% (20 Hz - 20 kHz)
Signal-to-Noise Ratio98 dB (IHF-A weighted)
USB PortYes (Front)

Related product manuals