Denon AVR-S540BT User Manual

Audio
Make audio-related settings.
Surr.Parameter
You can adjust the surround audio sound field effects to match your
preferences.
The items (parameters) that can be adjusted depend on the signal being
input and the currently set sound mode. For details on the adjustable
parameters, see “Sound modes and surround parameters” (v
p. 120).
0
Some setting items cannot be set while playback is stopped. Make the settings
during playback.
0
“Surr.Parameter” settings are stored for each sound mode.
o
Mode
Set the sound mode according to the input signal.
n
Dolby PLg Mode
Movie :
Switches to the sound mode suitable for
enjoying movies and TV programs.
Music :
Switches to the sound mode suitable for
enjoying music.
Game :
Switches to the sound mode suitable for
enjoying games.
Pro Logic : Dolby Pro Logic playback mode.
n
DTS Neo: 6 mode
Cinema :
Switches to the sound mode suitable for
enjoying movies and TV programs.
Music :
Switches to the sound mode suitable for
enjoying music.
0
“Music” mode is also effective for video sources that contain a lot of stereo
music.
Contents Connections Playback Settings Tips Appendix
71
Front panel Display Rear panel Remote Index

Denon AVR-S540BT Specifications

General

Channels	5.2
Power Output per Channel	70 W (8 ohm, 20 Hz - 20 kHz, 0.08% 2ch Drive)
Output Power (6 ohm, 1 kHz, 0.7% 2ch Drive)	90 W
Output Power (6 ohm, 1 kHz, 10% 1ch Drive)	140 W
HDMI Inputs	5
HDMI Outputs	1
HDMI Version	2.0a
HDCP Support	2.2
4K/60 Hz Pass-through	Yes
Dolby Format	Dolby TrueHD, Dolby Digital Plus
DTS Format	DTS-HD Master Audio
Auto Speaker Setup	Yes (Audyssey MultEQ)
Bluetooth	Yes
FM Tuner	Yes
AM Tuner	Yes
Input Sensitivity/Impedance	200 mV / 47 kOhm
Dimensions (W x H x D)	434 x 151 x 319 mm
Ethernet Port	No
Wi-Fi	No
HDR Support	HDR10, HLG
Frequency Response	10 Hz - 100 kHz - +1/-3 dB
Total Harmonic Distortion	0.08% (20 Hz - 20 kHz)
Signal-to-Noise Ratio	98 dB (IHF-A weighted)
USB Port	Yes (Front)