EasyManuals Logo

Denon AVR-S540BT User Manual

Denon AVR-S540BT
135 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #90 background imageLoading...
Page #90 background image
Levels
Set the volume of the test tone to be the same at the listening position
when it is output from each speaker.
o
Test Tone Start
A test tone is output from the selected speaker.
While listening to the test tone, adjust the volume output from the
selected speaker.
–12.0 dB – +12.0 dB (Default : 0.0 dB)
0
The set “Levels” are reflected in all sound modes.
0
When headphones are connected to the PHONES connector on this unit, you
cannot set “Levels”.
o
Set Defaults
The “Levels” settings are returned to the default settings.
Crossovers
Set in accordance with the lower limit frequency of the base frequencies
that can be played back through each speaker.
o
Set the crossover frequency
40 Hz / 60 Hz / 80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz / 150 Hz /
200 Hz / 250 Hz (Default : 80 Hz)
0
“Crossovers” can be set when the “Subwoofer Mode” setting is “LFE+Main”, or
when you have a speaker that is set to “Small”. (v
p. 91)
0
The default crossover frequency is “80 Hz”, which will work best with the
widest variety of speakers. We recommend setting to a higher frequency that
the crossover frequency when small speakers are used. For example, set to
“250 Hz” when the frequency range of the speakers is 250 Hz – 20 kHz.
0
Sounds below crossover frequency is cut off in the output from the speaker set
up in “Small”. The cut off bass frequencies is output from the sub-woofer or
front speaker.
Contents Connections Playback Settings Tips Appendix
90
Front panel Display Rear panel Remote Index

Other manuals for Denon AVR-S540BT

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-S540BT and is the answer not in the manual?

Denon AVR-S540BT Specifications

General IconGeneral
Channels5.2
Power Output per Channel70 W (8 ohm, 20 Hz - 20 kHz, 0.08% 2ch Drive)
Output Power (6 ohm, 1 kHz, 0.7% 2ch Drive)90 W
Output Power (6 ohm, 1 kHz, 10% 1ch Drive)140 W
HDMI Inputs5
HDMI Outputs1
HDMI Version2.0a
HDCP Support2.2
4K/60 Hz Pass-throughYes
Dolby FormatDolby TrueHD, Dolby Digital Plus
DTS FormatDTS-HD Master Audio
Auto Speaker SetupYes (Audyssey MultEQ)
BluetoothYes
FM TunerYes
AM TunerYes
Input Sensitivity/Impedance200 mV / 47 kOhm
Dimensions (W x H x D)434 x 151 x 319 mm
Ethernet PortNo
Wi-FiNo
HDR SupportHDR10, HLG
Frequency Response10 Hz - 100 kHz - +1/-3 dB
Total Harmonic Distortion0.08% (20 Hz - 20 kHz)
Signal-to-Noise Ratio98 dB (IHF-A weighted)
USB PortYes (Front)

Related product manuals