Denon AVR-S540BT User Manual

Checking the information
.
INFO
Information on the main unit’s various settings (Status) and on input
signals (Audio Input Signal) is shown on the display.
1
Press INFO.
The information screen is displayed.
0
Press INFO to display current input source name, volume, sound mode, and other
information at the bottom of the screen.
.
SOURCE
SOUND
SOURCE
ROOM EQ
Digital
Multi Ch Stereo
Bluetooth
Off
40.0
NOTE
0
The status display screen cannot be displayed when playing the following video
signals.
0
Computer resolution video
0
Video with an aspect ratio other than 16:9 or 4:3
Contents Connections Playback Settings Tips Appendix
97
Front panel Display Rear panel Remote Index

Denon AVR-S540BT Specifications

General

Channels	5.2
Power Output per Channel	70 W (8 ohm, 20 Hz - 20 kHz, 0.08% 2ch Drive)
Output Power (6 ohm, 1 kHz, 0.7% 2ch Drive)	90 W
Output Power (6 ohm, 1 kHz, 10% 1ch Drive)	140 W
HDMI Inputs	5
HDMI Outputs	1
HDMI Version	2.0a
HDCP Support	2.2
4K/60 Hz Pass-through	Yes
Dolby Format	Dolby TrueHD, Dolby Digital Plus
DTS Format	DTS-HD Master Audio
Auto Speaker Setup	Yes (Audyssey MultEQ)
Bluetooth	Yes
FM Tuner	Yes
AM Tuner	Yes
Input Sensitivity/Impedance	200 mV / 47 kOhm
Dimensions (W x H x D)	434 x 151 x 319 mm
Ethernet Port	No
Wi-Fi	No
HDR Support	HDR10, HLG
Frequency Response	10 Hz - 100 kHz - +1/-3 dB
Total Harmonic Distortion	0.08% (20 Hz - 20 kHz)
Signal-to-Noise Ratio	98 dB (IHF-A weighted)
USB Port	Yes (Front)