Denon AVR-S670H - Page 97

Displaying your desired video during
audio playback (Video Select)
This unit can display video from a different source on TV during audio
playback. You can set this for each input source.
n
Supported input sources:
Tuner / HEOS Music / Phono
1
Press OPTION.
An option menu screen is displayed.
0
When the input source is “HEOS Music”, an option menu for
online music is displayed. Select “AVR Options…”, then press
ENTER.
2
Use cursor Up/Down to select “Video Select”, then
press ENTER.
The “Video Select” screen is displayed.
3
Use cursor Left/Right to select the Video Select mode.
Off
(Default):
Disable Video Select mode.
On: Enable Video Select mode.
4
If you selected “On” in step 3, press cursor Down and
select “Source”.
5
Use cursor Left/Right to select the input source for
video you want to play back, then press ENTER.
Last
(Default):
Plays the video from the last input
source that was played.
CBL/SAT /
Media Player /
Blu-ray / Game /
AUX1 / AUX2:
Plays the video from the selected input
source.
z
z
You can select the input source to which the HDMI terminal is assigned.
0
“Video Select” settings are stored for each input source.
Contents Connections Playback Settings Tips Appendix
97
Front panel Display Rear panel Remote Index