EasyManuals Logo

Denon AVR-S740H User Manual

Denon AVR-S740H
272 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #119 background imageLoading...
Page #119 background image
HDMI Control function
A recent addition to the HDMI standard is CEC (Consumer Electronics Control), which allows control signals from one device to communicate with
another device via the HDMI cable connection.
Setting procedure
1
Enable the HDMI Control function of this unit.
Set “HDMI Control” to “On”. (v p. 155)
2
Turn the power on for all the devices connected by
HDMI cable.
3
Set the HDMI Control function for all devices connected
by HDMI cable.
0
Please consult the operating instructions for the connected
devices to check the settings.
0
Carry out steps 2 and 3 should any of the devices be unplugged.
4
Switch the television input to the HDMI input connected
to this unit.
5
Switch the input source of this unit to check that video
from the player connected by HDMI is played back
correctly.
6
When you turn the TV’s power to standby, check that
the power of this unit also goes to standby.
NOTE
0
Some functions may not operate depending on the connected TV or player. Check
the owner’s manual of each device for details beforehand.
Contents Connections Playback Settings Tips Appendix
119
Front panel Display Rear panel Remote Index

Other manuals for Denon AVR-S740H

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-S740H and is the answer not in the manual?

Denon AVR-S740H Specifications

General IconGeneral
Channels7.2
Power Output per Channel75 W (8 Ohms, 20 Hz - 20 kHz, 0.08% THD)
HDMI Inputs6
HDMI Outputs1
Dolby AtmosYes
DTS:XYes
BluetoothYes
Wi-FiYes
HEOS Multi-roomYes
4K Ultra HD Pass-throughYes
Power Output per Channel (6 Ohms)110 W (6 Ohms, 1 kHz, 0.7% THD)
4K/Ultra HD UpscalingYes
Phono InputYes
Dolby SupportDolby Atmos, Dolby TrueHD, Dolby Surround
Auto CalibrationAudyssey MultEQ
Input Sensitivity/Impedance200 mV / 47 kOhms
Signal-to-Noise Ratio98 dB (IHF-A weighted, Direct mode)
EthernetYes
USB PortYes (front)
AM/FM TunerYes
Supported Audio FormatsMP3, WMA, AAC, FLAC, ALAC, WAV, DSD
HDR SupportHDR10, HLG, Dolby Vision
Wireless AudioAirPlay 2
DTS SupportDTS:X, DTS-HD Master Audio
Zone AudioZone 2
Frequency Response10 Hz - 100 kHz (+1, -3 dB, Direct Mode)
Total Harmonic Distortion0.08% (20 Hz - 20 kHz)
Built-in DAC192 kHz / 24-bit

Related product manuals