z1
This item can be selected when using any of the Surround Back, Front Height, Top Front, Top Middle, Front Dolby or Surround Dolby speaker.
z2
This item can be selected when surround back speakers are used.
z3
This item can be selected when the input signal is DTS-HD Master Audio.
z4
This item can be selected when the input signal is DTS-HD Hi Resolution.
z5
This item can be selected when the input signal is DTS 96/24.
z6
This can be selected when the Dolby Atmos signal contains the Dolby TrueHD signal.
z7
This can be selected when the Dolby Atmos signal contains the Dolby Digital Plus signal.
z8
The default sound mode for the AirPlay playback is “Direct”.
z9
This item can be selected when the input signals contain surround back signals.
z10
This can be selected when the Dolby Atmos signal contains the Dolby TrueHD or Dolby Digital Plus signal.
z11
This item cannot be selected when a DTS(-HD) format with a sampling frequency of over 48 kHz is input.
Contents Connections Playback Settings Tips Appendix
249
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
