EasyManuals Logo

Denon AVR-X1300W User Manual

Denon AVR-X1300W
275 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #224 background imageLoading...
Page #224 background image
o
No video is shown on the TV
Symptom Cause / Solution Page
No picture appears.
0
Check the connections for all devices. 48
0
Insert connection cables all the way in.
0
Check that input connectors and output connectors are not reversely connected.
0
Check cables for damage.
0
Match the input settings to the input connector of the TV connected to this unit. 170
0
Check that the proper input source is selected. 64
0
Check the video input connector setting. 170
0
Check that the resolution of the player corresponds to that of the TV. 212
0
Check whether the TV is compatible with copyright protection (HDCP). If connected to a device not
compatible with HDCP, video will not be output correctly.
236
0
To enjoy content that is copyright protected by HDCP 2.2, use a playback device and TV compatible with
HDCP 2.2 only.
0
To play back a 4K (60/50Hz) video, use a “High Speed HDMI Cable” or an “High Speed HDMI Cable with
Ethernet”. In order to achieve a higher fidelity for 4K (60/50Hz) videos, it is recommended to use a
“Premium High Speed HDMI Cables” or an “Premium High Speed HDMI Cables with Ethernet” that has
an HDMI Premium Certified Cable label on the product package.
No video is shown on the
TV with the DVI-D
connection.
0
With the DVI-D connection, on some device combinations, devices may not function properly due to the
copy guard copyright protection (HDCP).
236
While the menu is being
displayed, no video is
shown on the TV.
0
The video being played will not appear in the background of the menu when the menu is operated during
playback of the following video signals.
- Some images of 3D video content
- Computer resolution images (example: VGA)
- Video with an aspect ratio other than 16:9 or 4:3
- Some images of 4K video content
Contents Connections Playback Settings Tips Appendix
224
Front panel Display Rear panel Remote Index

Other manuals for Denon AVR-X1300W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X1300W and is the answer not in the manual?

Denon AVR-X1300W Specifications

General IconGeneral
Display-
Product colorBlack
Audio decodersDSD, Dolby TrueHD
Audio amplifierYes
Multi-Zone quantity2
Apple docking compatibilityNot supported
Receiver typeSurround
Frequency range10 - 100000 Hz
Output impedance16 Ω
Input sensitivity200 mV
Audio output channels7.1 channels
Signal-to-Noise Ratio (SNR)98 dB
Power output per channel (20-20KHz@8 Ohm)145 W
Audio formats supportedAAC, AIFF, ALAC, FLAC, MP3, WAV, WMA
HDMI in6
Digital audio coaxial in0
Ethernet LAN (RJ-45) ports1
Supported video modes2160p
AC input voltage230 V
AC input frequency50 Hz
Power consumption (standby)0.1 W
Power consumption (typical)430 W
AM band range522 - 1611 kHz
FM band range87.5 - 108 MHz
Supported radio bandsAM, FM
Connectivity technologyWired
Speakers connectivity type3.5mm
Optical drive includedNo
Weight and Dimensions IconWeight and Dimensions
Depth339 mm
Width434 mm
Height215 mm
Weight8500 g

Related product manuals