Do you have a question about the Denon AVR-X8500H and is the answer not in the manual?
Channels | 13.2 |
---|---|
Power Output | 150W per channel (8 ohms, 20Hz-20kHz, 0.05% THD) |
Frequency Response | 10Hz-100kHz (+1, -3dB) |
HDMI Inputs | 8 (1 front) |
HDMI Outputs | 3 |
Dolby Atmos | Yes |
DTS:X | Yes |
IMAX Enhanced | Yes |
HEOS Multi-room | Yes |
Wi-Fi | Yes |
Bluetooth | Yes |
Voice Control | Amazon Alexa, Google Assistant, Apple Siri |
Impedance | 4-16 ohms |
HDR Compatibility | HDR10, Dolby Vision, HLG |
Audio Return Channel (ARC) | Yes |
Digital Audio Inputs | 2 Optical, 2 Coaxial |
Analog Audio Inputs | 6 |
Phono Input | Yes |
Speaker Connectors | Binding Posts |
Supported Audio Formats | MP3, WMA, AAC, FLAC, ALAC, WAV, DSD |
Surround Sound Support | Dolby Atmos, DTS:X, Auro-3D |
Tuner | AM/FM |
Input Sensitivity/Impedance | 200 mV / 47 kohms |
HDCP Support | 2.2 |
Other Connections | USB, Ethernet, RS-232C |
Wireless Connectivity | Wi-Fi, Bluetooth |
Signal-to-Noise Ratio | 102 dB |
DAC | AKM AK4490EQ (32-bit/192kHz) |
Total Harmonic Distortion | 0.05% (20Hz - 20kHz, 150W) |
Instructions on how to properly insert batteries into the remote control unit.
Describes the unit's discrete circuit technology and support for Dolby Atmos and DTS:X.
Details 4K 60Hz input/output, HDCP 2.2 compatibility, and HDMI ZONE2 output.
Diagram and labels for all input and output connectors on the rear panel.
Safety precautions and initial settings for speaker impedance.
Table outlining speaker configurations and corresponding amp assignments.
Connecting a TV with HDMI and ARC for audio return.
Enabling network playback and operations via wired or wireless LAN.
Guide to enjoying various surround and stereo playback modes.
Grouping and ungrouping rooms for synchronized audio playback.
Guidance on Audyssey Setup, manual speaker configuration, and room calibration.
Adjusting picture quality including mode, contrast, brightness, and noise reduction.
Configuration of HDMI audio output, pass-through, and control functions.
Solutions for power not turning on or automatic power off.
Resolving issues with no sound, distorted sound, or cut-outs.
Troubleshooting no video display on TV or interrupted video output.