Menu map
When using menu operations, connect this unit to a TV and operate this unit while viewing the TV.
The recommended settings are configured for this unit by default. You can customize this unit based on your existing system and your preferences.
Setting items Detailed items Description Page
Audio
Subwoofer Level Adjust Adjusts the subwoofer channel volume for all input sources. 180
Bass Sync Adjusts the phase shift when there is a delay in the bass (LFE) recorded on a disc. 180
Surround Parameter Adjusts surround sound parameters. 181
Restorer Expands the low and high frequency components of compressed audio content such as
MP3 files to enable richer audio playback.
186
Audio Delay Compensates for incorrect timing between video and audio. 187
Volume Sets the MAIN ZONE (room where the unit is located) volume setting. 188
Audyssey
Makes Audyssey MultEQ
®
XT32, Audyssey Dynamic EQ
®
, Audyssey Dynamic
Volume
®
and Audyssey LFC
TM
settings.
189
Graphic EQ Uses the graphic equalizer to adjust the tone of each speaker. 192
Video
Picture Adjust Adjusts picture quality. 194
HDMI Setup Makes settings for HDMI Audio Out, HDMI Pass Through and HDMI Control settings. 196
Output Settings Makes settings for video output. 201
Analog Video Out Selects the zone that uses component video output and video output. 204
On Screen Display Configures the on-screen display settings. 205
4K Signal Format Set the 4K signal format when the TV or playback device is 4K compatible. 206
TV Format Sets the video signal format to be output for the TV you are using. 207
Contents Connections Playback Settings Tips Appendix
175
Front panel Display Rear panel Remote Index
To Next Page
Loading...
