EasyManuals Logo

Denon AVR-X8500H User Manual

Denon AVR-X8500H
360 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #188 background imageLoading...
Page #188 background image
Volume
Set the MAIN ZONE (room where the unit is located) volume setting.
o
Scale
Set how volume is displayed.
0 - 98
(Default):
Display in the range 0 (Min) to 98.
–79.5 dB – 18.0 dB:
Display ---dB (Min), in the range –79.5 dB
to 18.0 dB.
0
“Scale” settings are reflected in all the zones.
o
Limit
Make a setting for maximum volume.
60 (–20 dB) / 70 (–10 dB) / 80 (0 dB)
Off (Default)
0
The dB value is displayed when the “Scale” setting is “ –79.5 dB – 18.0
dB”. (v
p. 188)
o
Power On Level
Define the volume setting that is active when the power is turned on.
Last
(Default):
Use the memorized setting from the last
session.
Mute:
Always use the muting on condition when
power is turned on.
1 – 98 (–79 dB – 18 dB) : The volume is adjusted to the set level.
0
The dB value is displayed when the “Scale” setting is “ –79.5 dB – 18.0
dB”. (v
p. 188)
o
Mute Level
Set the amount of attenuation when muting is on.
Full
(Default):
The sound is muted entirely.
–40 dB : The sound is attenuated by 40 dB down.
–20 dB : The sound is attenuated by 20 dB down.
Contents Connections Playback Settings Tips Appendix
188
Front panel Display Rear panel Remote Index

Other manuals for Denon AVR-X8500H

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X8500H and is the answer not in the manual?

Denon AVR-X8500H Specifications

General IconGeneral
Channels13.2
Power Output150W per channel (8 ohms, 20Hz-20kHz, 0.05% THD)
Frequency Response10Hz-100kHz (+1, -3dB)
HDMI Inputs8 (1 front)
HDMI Outputs3
Dolby AtmosYes
DTS:XYes
IMAX EnhancedYes
HEOS Multi-roomYes
Wi-FiYes
BluetoothYes
Voice ControlAmazon Alexa, Google Assistant, Apple Siri
Impedance4-16 ohms
HDR CompatibilityHDR10, Dolby Vision, HLG
Audio Return Channel (ARC)Yes
Digital Audio Inputs2 Optical, 2 Coaxial
Analog Audio Inputs6
Phono InputYes
Speaker ConnectorsBinding Posts
Supported Audio FormatsMP3, WMA, AAC, FLAC, ALAC, WAV, DSD
Surround Sound SupportDolby Atmos, DTS:X, Auro-3D
TunerAM/FM
Input Sensitivity/Impedance200 mV / 47 kohms
HDCP Support2.2
Other ConnectionsUSB, Ethernet, RS-232C
Wireless ConnectivityWi-Fi, Bluetooth
Signal-to-Noise Ratio102 dB
DACAKM AK4490EQ (32-bit/192kHz)
Total Harmonic Distortion0.05% (20Hz - 20kHz, 150W)

Related product manuals