Denon AVR-X8500H User Manual

Operating macro function
0
When the macro function is used, operations that usually require a
complicated series of multiple button operations can be performed
easily just by pressing the MACRO button.
0
This device can remember up to 4 macro functions.
0
Each macro can record a maximum of 18 steps.
G Example H
When the following set of operations has been registered to the MACRO
button, you can simply press the MACRO button to turn on the TV and this
unit and start playing back Blu-ray Disc player.
A
Turn the TV’s power on.
$
B
Turn this unit’s power on.
$
C
Switch this unit’s input source to “Blu-ray”.
$
D
Turn the Blu-ray Disc player’s power on.
$
E
Play the Blu-ray Disc player.
o
Recording automatic macro operations
You can automatically set the macro for your scene.
1. Watch movies (MOVIE)
2. Listen to music (MUSIC)
3. Watch TV (CBL/SAT) (WATCH)
4. Turn on all devices (ON)
5. Turn off all devices (OFF)
NOTE
0
Register preset codes for the remote control unit before setting Auto macro.
(v
p. 270)
0
Depending on the type or model of your device, macro may not work properly
even if it is set.
Contents Connections Playback Settings Tips Appendix
279
Front panel Display Rear panel Remote Index

Denon AVR-X8500H Specifications

General

Channels	13.2
Power Output	150W per channel (8 ohms, 20Hz-20kHz, 0.05% THD)
Frequency Response	10Hz-100kHz (+1, -3dB)
HDMI Inputs	8 (1 front)
HDMI Outputs	3
Dolby Atmos	Yes
DTS:X	Yes
IMAX Enhanced	Yes
HEOS Multi-room	Yes
Wi-Fi	Yes
Bluetooth	Yes
Voice Control	Amazon Alexa, Google Assistant, Apple Siri
Impedance	4-16 ohms
HDR Compatibility	HDR10, Dolby Vision, HLG
Audio Return Channel (ARC)	Yes
Digital Audio Inputs	2 Optical, 2 Coaxial
Analog Audio Inputs	6
Phono Input	Yes
Speaker Connectors	Binding Posts
Supported Audio Formats	MP3, WMA, AAC, FLAC, ALAC, WAV, DSD
Surround Sound Support	Dolby Atmos, DTS:X, Auro-3D
Tuner	AM/FM
Input Sensitivity/Impedance	200 mV / 47 kohms
HDCP Support	2.2
Other Connections	USB, Ethernet, RS-232C
Wireless Connectivity	Wi-Fi, Bluetooth
Signal-to-Noise Ratio	102 dB
DAC	AKM AK4490EQ (32-bit/192kHz)
Total Harmonic Distortion	0.05% (20Hz - 20kHz, 150W)